Class ESPLoader

constructor

• new ESPLoader(options): ESPLoader

• Create a new ESPLoader to perform serial communication such as read/write flash memory and registers using a LoaderOptions object.

  Parameters

  • options: LoaderOptions

    LoaderOptions object argument for ESPLoader.

    const myLoader = new ESPLoader({ transport: Transport, baudrate: number, terminal?: IEspLoaderTerminal });
    Copy

  Returns ESPLoader

CHIP_DETECT_MAGIC_REG_ADDR

CHIP_ERASE_TIMEOUT

DEFAULT_TIMEOUT

DETECTED_FLASH_SIZES

DETECTED_FLASH_SIZES_NUM

ERASE_REGION_TIMEOUT_PER_MB

ERASE_WRITE_TIMEOUT_PER_MB

ESP_CHANGE_BAUDRATE

ESP_CHECKSUM_MAGIC

ESP_ERASE_FLASH

ESP_ERASE_REGION

ESP_FLASH_BEGIN

ESP_FLASH_DATA

ESP_FLASH_DEFL_BEGIN

ESP_FLASH_DEFL_DATA

ESP_FLASH_DEFL_END

ESP_FLASH_END

ESP_IMAGE_MAGIC

ESP_MEM_BEGIN

ESP_MEM_DATA

ESP_MEM_END

ESP_RAM_BLOCK

ESP_READ_FLASH

ESP_READ_REG

ESP_RUN_USER_CODE

ESP_SPI_ATTACH

ESP_SPI_FLASH_MD5

ESP_WRITE_REG

FLASH_READ_TIMEOUT

FLASH_WRITE_SIZE

IS_STUB

MAX_TIMEOUT

MD5_TIMEOUT_PER_MB

ROM_INVALID_RECV_MSG

USB_JTAG_SERIAL_PID

checksum

chip

flashSizeBytes

timeoutPerMb

transport

_appendArray

• _appendArray(arr1, arr2): Uint8Array

• Append a buffer array after another buffer array

  Parameters

  • arr1: Uint8Array

    First array buffer.

  • arr2: Uint8Array

    magic hex number to select ROM.

  Returns Uint8Array

  Return a 8 bit unsigned array.

_appendBuffer

• _appendBuffer(buffer1, buffer2): ArrayBufferLike

• Append a buffer array after another buffer array

  Parameters

  • buffer1: ArrayBuffer

    First array buffer.

  • buffer2: ArrayBuffer

    magic hex number to select ROM.

  Returns ArrayBufferLike

  Return an array buffer.

_byteArrayToInt

• _byteArrayToInt(i, j, k, l): number

• Convert a byte array to integer.

  Parameters

  • i: number

    Number to convert.

  • j: number

    Number to convert.

  • k: number

    Number to convert.

  • l: number

    Number to convert.

  Returns number

  Return a integer number.

_byteArrayToShort

• _byteArrayToShort(i, j): number

• Convert a byte array to short integer.

  Parameters

  • i: number

    Number to convert.

  • j: number

    Number to convert.

  Returns number

  Return a short integer number.

_connectAttempt

• _connectAttempt(mode?, resetStrategy): Promise<string>

• Attempt to connect to the chip by sending a reset sequence and later a sync command.

  Parameters

  • mode: string = "default_reset"

    Reset mode to use

  • resetStrategy: ResetStrategy

    Reset strategy class to use for connect

  Returns Promise<string>

  • Returns 'success' or 'error' message.

_intToByteArray

• _intToByteArray(i): Uint8Array

• Convert an integer to byte array

  Parameters

  • i: number

    Number to convert.

  Returns Uint8Array

  The chip ROM class related to given magic hex number.

_shortToBytearray

• _shortToBytearray(i): Uint8Array

• Convert short integer to byte array

  Parameters

  • i: number

    Number to convert.

  Returns Uint8Array

  Byte array.

_sleep

• _sleep(ms): Promise<unknown>

• Parameters

  • ms: number

  Returns Promise<unknown>

_updateImageFlashParams

• _updateImageFlashParams(image, address, flashSize, flashMode, flashFreq): string

• Update the image flash parameters with given arguments.

  Parameters

  • image: string

    binary image as string

  • address: number

    flash address number

  • flashSize: string

    Flash size string

  • flashMode: string

    Flash mode string

  • flashFreq: string

    Flash frequency string

  Returns string

  modified image string

bstrToUi8

• bstrToUi8(bStr): Uint8Array

• Convert a byte string to unsigned 8 bit integer array.

  Parameters

  • bStr: string

    binary string input

  Returns Uint8Array

  Return a 8 bit unsigned integer array.

changeBaud

• changeBaud(): Promise<void>

• Change the chip baudrate.

  Returns Promise<void>

checkCommand

• checkCommand(opDescription?, op?, data?, chk?, timeout?): Promise<number | Uint8Array>

• Execute the command and check the command response.

  Parameters

  • opDescription: string = ""

    Command operation description.

  • op: null | number = null

    Command operation number

  • data: Uint8Array = ...

    Command value

  • chk: number = 0

    Checksum to use

  • timeout: number = 3000

    TImeout number in milliseconds (ms)

  Returns Promise<number | Uint8Array>

  Command result

command

• command(op?, data?, chk?, waitResponse?, timeout?): Promise<[number, Uint8Array]>

• Write a serial command to the chip

  Parameters

  • op: null | number = null

    Operation number

  • data: Uint8Array = ...

    Unsigned 8 bit array

  • chk: number = 0

    channel number

  • waitResponse: boolean = true

    wait for response ?

  • timeout: number = ...

    timeout number in milliseconds

  Returns Promise<[number, Uint8Array]>

  Return a number and a 8 bit unsigned integer array.

connect

• connect(mode?, attempts?, detecting?): Promise<void>

• Perform a connection to chip.

  Parameters

  • mode: string = "default_reset"

    Reset mode to use. Example: 'default_reset' | 'no_reset'

  • attempts: number = 7

    Number of connection attempts

  • detecting: boolean = false

    Detect the connected chip

  Returns Promise<void>

constructResetSequency

• constructResetSequency(): ResetStrategy[]

• Returns ResetStrategy[]

debug

• debug(str, withNewline?): void

• Write debug message to ESP Loader constructor's terminal with or without new line.

  Parameters

  • str: string

    String to write.

  • withNewline: boolean = true

    Add new line at the end ?

  Returns void

detectChip

• detectChip(mode?): Promise<void>

• Connect and detect the existing chip.

  Parameters

  • mode: string = "default_reset"

    Reset mode to use for connection.

  Returns Promise<void>

eraseFlash

• eraseFlash(): Promise<number | Uint8Array>

• Execute the erase flash command

  Returns Promise<number | Uint8Array>

  Erase flash command result

error

• error(str, withNewline?): void

• Write error message to ESP Loader constructor's terminal with or without new line.

  Parameters

  • str: string

    String to write.

  • withNewline: boolean = true

    Add new line at the end ?

  Returns void

flashBegin

• flashBegin(size, offset): Promise<number>

• Start downloading to Flash (performs an erase)

  Parameters

  • size: number

    Size to erase

  • offset: number

    Offset to erase

  Returns Promise<number>

  Number of blocks (of size self.FLASH_WRITE_SIZE) to write.

flashBlock

• flashBlock(data, seq, timeout): Promise<void>

• Write block to flash, retry if fail

  Parameters

  • data: Uint8Array

    Unsigned 8-bit array data.

  • seq: number

    Sequence number

  • timeout: number

    Timeout in milliseconds (ms)

  Returns Promise<void>

flashDeflBegin

• flashDeflBegin(size, compsize, offset): Promise<number>

• Start downloading compressed data to Flash (performs an erase)

  Parameters

  • size: number

    Write size

  • compsize: number

    Compressed size

  • offset: number

    Offset for write

  Returns Promise<number>

  Returns number of blocks (size self.FLASH_WRITE_SIZE) to write.

flashDeflBlock

• flashDeflBlock(data, seq, timeout): Promise<void>

• Write block to flash, send compressed, retry if fail

  Parameters

  • data: Uint8Array

    Unsigned int 8-bit array data to write

  • seq: number

    Sequence number

  • timeout: number

    Timeout in milliseconds (ms)

  Returns Promise<void>

flashDeflFinish

• flashDeflFinish(reboot?): Promise<void>

• Leave compressed flash mode and run/reboot

  Parameters

  • reboot: boolean = false

    Reboot after leaving flash mode ?

  Returns Promise<void>

flashFinish

• flashFinish(reboot?): Promise<void>

• Leave flash mode and run/reboot

  Parameters

  • reboot: boolean = false

    Reboot after leaving flash mode ?

  Returns Promise<void>

flashId

• flashId(): Promise<void>

• Read SPI flash manufacturer and device id.

  Returns Promise<void>

flashMd5sum

• flashMd5sum(addr, size): Promise<string>

• Calculate the MD5 Checksum command

  Parameters

  • addr: number

    Address number

  • size: number

    Package size

  Returns Promise<string>

  MD5 Checksum string

flashSpiAttach

• flashSpiAttach(hspiArg): Promise<void>

• Configure SPI flash pins

  Parameters

  • hspiArg: number

    Argument for SPI attachment

  Returns Promise<void>

flushInput

• flushInput(): Promise<void>

• Flush the serial input by raw read with 200 ms timeout.

  Returns Promise<void>

getFlashSize

• getFlashSize(): Promise<number>

• Returns Promise<number>

hardReset

• hardReset(): Promise<void>

• Perform a chip hard reset by setting RTS to LOW and then HIGH.

  Returns Promise<void>

info

• info(str, withNewline?): void

• Write information message to ESP Loader constructor's terminal with or without new line.

  Parameters

  • str: string

    String to write.

  • withNewline: boolean = true

    Add new line at the end ?

  Returns void

main

• main(mode?): Promise<string>

• Execute the main function of ESPLoader.

  Parameters

  • mode: string = "default_reset"

    Reset mode to use

  Returns Promise<string>

  chip ROM

memBegin

• memBegin(size, blocks, blocksize, offset): Promise<void>

• Start downloading an application image to RAM

  Parameters

  • size: number

    Image size number

  • blocks: number

    Number of data blocks

  • blocksize: number

    Size of each data block

  • offset: number

    Image offset number

  Returns Promise<void>

memBlock

• memBlock(buffer, seq): Promise<void>

• Send a block of image to RAM

  Parameters

  • buffer: Uint8Array

    Unsigned 8-bit array

  • seq: number

    Sequence number

  Returns Promise<void>

memFinish

• memFinish(entrypoint): Promise<void>

• Leave RAM download mode and run application

  Parameters

  • entrypoint: number

    Entrypoint number

  Returns Promise<void>

parseFlashSizeArg

• parseFlashSizeArg(flsz): number

• Parse a given flash size string to a number

  Parameters

  • flsz: string

    Flash size to request

  Returns number

  Flash size number

readFlash

• readFlash(addr, size, onPacketReceived?): Promise<Uint8Array>

• Parameters

  • addr: number

  • size: number

  • onPacketReceived: FlashReadCallback = null

  Returns Promise<Uint8Array>

readFlashId

• readFlashId(): Promise<number>

• Read flash id by executing the SPIFLASH_RDID flash command.

  Returns Promise<number>

  Register SPI_W0_REG value

readPacket

• readPacket(op?, timeout?): Promise<[number, Uint8Array]>

• Use the device serial port read function with given timeout to create a valid packet.

  Parameters

  • op: null | number = null

    Operation number

  • timeout: number = ...

    timeout number in milliseconds

  Returns Promise<[number, Uint8Array]>

  valid response packet.

readReg

• readReg(addr, timeout?): Promise<number>

• Read a register from chip.

  Parameters

  • addr: number

    Register address number

  • timeout: number = ...

    Timeout in milliseconds (Default: 3000ms)

  Returns Promise<number>

  • Command number value

runSpiflashCommand

• runSpiflashCommand(spiflashCommand, data, readBits): Promise<number>

• Run an arbitrary SPI flash command.

  This function uses the "USR_COMMAND" functionality in the ESP SPI hardware, rather than the precanned commands supported by hardware. So the value of spiflashCommand is an actual command byte, sent over the wire.

  After writing command byte, writes 'data' to MOSI and then reads back 'readBits' of reply on MISO. Result is a number.

  Parameters

  • spiflashCommand: number

    Command to execute in SPI

  • data: Uint8Array

    Data to send

  • readBits: number

    Number of bits to read

  Returns Promise<number>

  Register SPI_W0_REG value

runStub

• runStub(): Promise<ROM>

• Upload the flasher ROM bootloader (flasher stub) to the chip.

  Returns Promise<ROM>

  The Chip ROM

softReset

• softReset(): Promise<void>

• Soft reset the device chip. Soft reset with run user code is the closest.

  Returns Promise<void>

sync

• sync(): Promise<[number, Uint8Array]>

• Sync chip by sending sync command.

  Returns Promise<[number, Uint8Array]>

  Command result

toHex

• toHex(buffer): string

• Convert a number or unsigned 8-bit array to hex string

  Parameters

  • buffer: number | Uint8Array

    Data to convert to hex string.

  Returns string

  A hex string

ui8ToBstr

• ui8ToBstr(u8Array): string

• Convert a unsigned 8 bit integer array to byte string.

  Parameters

  • u8Array: Uint8Array

    magic hex number to select ROM.

  Returns string

  Return the equivalent string.

write

• write(str, withNewline?): void

• Write to ESP Loader constructor's terminal with or without new line.

  Parameters

  • str: string

    String to write.

  • withNewline: boolean = true

    Add new line at the end ?

  Returns void

writeFlash

• writeFlash(options): Promise<void>

• Write set of file images into given address based on given FlashOptions object.

  Parameters

  • options: FlashOptions

    FlashOptions to configure how and what to write into flash.

  Returns Promise<void>

writeReg

• writeReg(addr, value, mask?, delayUs?, delayAfterUs?): Promise<void>

• Write a number value to register address in chip.

  Parameters

  • addr: number

    Register address number

  • value: number

    Number value to write in register

  • mask: number = 0xffffffff

    Hex number for mask

  • delayUs: number = 0

    Delay number

  • delayAfterUs: number = 0

    Delay after previous delay

  Returns Promise<void>